Yamaha WR450F(S), Руководство по эксплуатации для владельца

Страница: 252 / 754

3 - 36
INSP
ADJ
DRIVE CHAIN STOPPER INSPECTION/FRONT FORK INSPECTION/
FRONT FORK OIL SEAL AND DUST SEAL CLEANING
●
Tighten the axle nut while pushing down
the drive chain.
T
R
.
.
Axle nut:
125 Nm (12.5 m • kg, 90 ft • lb)
●
Tighten the locknuts.
T
R
.
.
Locknut:
16 Nm (1.6 m • kg, 11 ft • lb)
DRIVE CHAIN STOPPER INSPECTION
1. Inspect:
●
Drive chain stopper 1
Wear indicator groove
a
has almost
disappeared
→
Replace.
2. Replace:
●
Drive chain stopper
1
1
a
T
R
.
.
7 Nm (0.7 m · kg, 5.1 ft · lb)
EC36C000
FRONT FORK INSPECTION
1. Inspect:
●
Front fork smooth action
Operate the front brake and stroke the
front fork.
Unsmooth action/oil leakage
→
Repair
or replace.
EC36D001
FRONT FORK OIL SEAL AND DUST SEAL
CLEANING
1. Remove:
●
Protector
●
Dust seal 1
NOTE:
Use a thin screw driver, and be careful not to
damage the inner fork tube and dust seal.
2. Clean:
●
Dust seal
a
●
Oil seal
b
NOTE:
●
Clean the dust seal and oil seal after every
run.
●
Apply the lithium soap base grease on the
inner tube.