Triumph Tiger Explorer XR 2016, Руководство по обслуживанию

Страница: 655 / 750

parameters
reset to default to Default
C1131 Rear preload
motor minimum
end stop
detection error.
Preload motor
not inhibited. 1 40 - Rear Preload Motor
Maximum/Minimum End Stop
Detection Error
C1132 Rear preload
motor minimum
end stop
detection error.
Preload motor
inhibited. 1 40 TSAS
light/warning
message Rear Preload Motor
Maximum/Minimum End Stop
Detection Error
C1133 Rear preload
motor
Maximum end
stop detection
error. Preload
motor not
inhibited. 1 40 - Rear Preload Motor
Maximum/Minimum End Stop
Detection Error
C1134 Rear preload
motor
Maximum end
stop detection
error. Preload
motor inhibited. 1 40 TSAS
light/warning
message Rear Preload Motor
Maximum/Minimum End Stop
Detection Error
* MIL illuminated by engine ECM in response to chassis ECM DTC being stored.
Before beginning any diagnosis, the following connector related information should be noted:
Note
A major cause of hidden electrical faults can be traced to faulty electrical connectors. For example:
Dirty/corroded terminals
Damp terminals
For example, the chassis Electronic Control Module (chassis ECM) relies on the supply of accurate information
to enable it to monitor and control its various systems. One dirty terminal will cause an excessive voltage drop
resulting in an incorrect signal to the chassis ECM.
If, when carrying out fault diagnosis, a fault appears to clear by simply disconnecting and reconnecting an
electrical plug, examine each disconnected plug for the following.
When Disconnecting a Connector:
Check for a security device that must be released before the connector can be separated, e.g. barb, hook
and eye etc.
When Inspecting a Connector:
Check that the individual pins have not been bent.
Check for dampness/dirt/corrosion.
Check cables for security.
Check cable pin joints for damage.
Tiger Explorer XR Series
651 of 746
ELECTRICAL