Command reference
R&S
®
ZNA
1374
User Manual 1178.6462.02 ─ 20
Manual operation:
See
[SENSe<Ch>:]PULSe:SYNCron[:STATe]
<Sync measurement to pulses>
Suffix:
<Ch>
.
Parameters:
<Sync measurement
to pulses>
Manual operation:
See
[SENSe<Ch>:]PULSe[:STATe]
<On/Off for muple modulation>
Suffix:
<Ch>
.
Parameters:
<On/Off for muple
modulation>
7.3.14.24
[SENSe:]ROSCillator...
The
[SENSe:]ROSCillator...
commands control the frequency reference signal.
[SENSe<Ch>:]ROSCillator[:SOURce]
<Source>
Selects the source of the reference oscillator signal.
Parameters:
<Source>
INTernal | EXTernal | ESMA
INTernal – internal 10 MHz reference oscillator
EXTernal – external reference clock via BNC connector
ESMA – external reference clock via SMA connector
The frequency of the external reference clock can be defined
using
[SENSe:]ROSCillator:EXTernal:FREQuency
*RST:
INTernal
Example:
See
[SENSe:]ROSCillator:EXTernal:FREQuency
Manual operation:
See
[SENSe:]ROSCillator:EXTernal:FREQuency
<ExtClockFreq>
Specifies or queries the frequency of the external reference oscillator.
SCPI command reference