Command reference
R&S
®
ZNA
1339
User Manual 1178.6462.02 ─ 20
[SENSe<Ch>:]FREQuency:IMODulation:SPECtrum[:STATe]
<Boolean>
Enables or disables the measurement of the intermodulation spectrum. If a new chan-
nel is desired, the trace must be created separately; see second example below.
Suffix:
<Ch>
.
Channel number
Parameters:
<Boolean>
ON | OFF - enables or disables intermodulation spectrum mea-
surement.
*RST:
OFF
Example:
Intermodulation spectrum measurement within the active chan-
nel.
*RST; FREQ:IMOD:LTON PORT,1; UTON GEN, 1
Reset the instrument to create the default channel no. 1. Select
port 1 as a source port for the lower tone, a (previously config-
ured) external generator no. 1 as a source port for the upper
tone.
FREQ:STAR 1GHZ; STOP 2GHz
Define a suitable sweep range to ensure that the analyzer can
measure all intermodulation products.
SENS1:FREQ:IMOD:SPEC ON
Enable the intermodulation spectrum measurement for channel
no. 1.
CALC1:PAR:CAT?
Query the traces in channel no. 1. The response is
'Trc1,B2D1SAM'
.
SENS1:FREQ 1.5 GHz; :SENS1:FREQ:IMOD:SPEC:MORD
9
Adjust the center frequency and the maximum IM order of the
spectrum intermodulation diagram.
SCPI command reference