R&S 1332.4500K22, Руководство пользователя

Страница: 1266 / 1709

Command reference
R&S
®
ZNA
1266 User Manual 1178.6462.02 ─ 20
Similar logic as
[SENSe:]CORRection:COLLect:AUTO:CKIT
, but with flexible port
assignment.
Setting parameters:
<Characterization> Location of the created characterization / cal kit file (string
parameter, extension *.calkit):
If a path is specified, the file is saved to the analyzer's hard disk.
The default directory (
MMEMory:CDIRectory
) is not used.
If only the file name is specified, the file is saved to the calibra-
tion unit's internal (flash) memory. The factory calibration data on
the unit is not overwritten.
If the file name is prefixed by "SD:", the file is saved to the SD
card inserted at the calibration unit (if available/accessible).
<TestPort1> Number of first test port.
<CalUnitPort1> Number of the calibration unit port to whom the first test port
(<TestPort1>) is assigned.
<TestPort2> Number of second test port...
Usage: Setting only
Manual operation: See "Test Port Assignment" on page 570
[SENSe:]CORRection:COLLect:AUTO:CKIT:PORTs:ADD <Characterization>,
<TestPort1>, <CalUnitPort1>[, <TestPort2>]...
Extends or modifies an existing characterization of the active calibration unit (
SYSTem:
COMMunicate:RDEVice:AKAL:ADDRess
).
This functionality is not available at the GUI.
Setting parameters:
<Characterization> Location of an existing characterization (e.g. created using
[SENSe:]CORRection:COLLect:AUTO:CKIT:PORTs
).
–
A VNA cal kit file name
*.calkit
without path refers to a
specific cal kit file stored in the internal memory of the active cal-
ibration unit.
–
A VNA cal kit file name without path but prefixed with "SD:"
refers to a specific cal kit file stored on the SD card inserted at
the active calibration unit.
–
A VNA cal kit file name
*.calkit
with path refers to a spe-
cific cal kit file stored in an arbitrary directory on the analyzer.
<TestPort1> Number of first test port.
<CalUnitPort1> Number of the calibration unit port, to whom test port <Test-
Port1> is assigned.
<TestPort2> Number of the second test port ...
SCPI command reference