Command reference
R&S
®
ZNA
1117
User Manual 1178.6462.02 ─ 20
Setting parameters:
<OldTraceName>
String parameter with old trace name, e.g.
'Trc1'
<NewTraceName>
String parameter with new trace name, e.g.
'S11 Trace'
*RST:
n/a
Example:
See
CONFigure:CHANnel<Ch>:TRACe:REName
Usage:
Setting only
Manual operation:
See
7.3.3
CONTrol commands
The
Control...
commands allow you to configure the following interfaces:
●
User Port
●
External Handler I/O (Universal Interface, option R&S
ZNBT-Z14)
●
(option R&S
ZNA-B15)
●
R&S
Chapter 4.7.6.1, "Live pulse analysis with R&S
..........................................................................................1118
CONTrol:GPIO<Port>:SENSe:VOLTage?
........................................................................1119
CONTrol:GPIO<Port>:SENSe:CURRent?
....................................................................... 1120
CONTrol:GPIO:SENSe:SUMCurrent?
.............................................................................1120
CONTrol<Ch>:GPIO:SENSe:TRIGger
............................................................................ 1121
............................................................................................ 1121
CONTrol<Ch>:GPIO:VOLTage:OUTPut
.......................................................................... 1121
CONTrol<Ch>:GPIO<Port>[:STATe]
............................................................................... 1122
............................................................................... 1122
.............................................................................. 1123
CONTrol<Ch>:GPIO<Port>:VOLTage[:DEFault]
...............................................................1124
............................................................................... 1124
................................................................................... 1124
CONTrol<Ch>:RFFE:TEST:SENSe:TRIGger
...................................................................1125
CONTrol<Ch>:RFFE<Bus>:COMMand:DATA
..................................................................1125
CONTrol<Ch>:RFFE<Bus>:COMMand:SEND
.................................................................1125
CONTrol<Ch>:RFFE<Bus>:COMMand:SEND?
............................................................... 1125
CONTrol<Ch>:RFFE<Bus>:SETTings[:STATe]
................................................................ 1126
CONTrol<Ch>:RFFE<Bus>:SETTings:FREQuency
..........................................................1126
CONTrol<Ch>:RFFE<Bus>:SETTings:VOLTage:IO
..........................................................1126
CONTrol<Ch>:RFFE<Bus>:SETTings:VOLTage:LOW
......................................................1126
CONTrol<Ch>:RFFE<Bus>:SETTings:VOLTage:HIGH
..................................................... 1126
CONTrol<Ch>:RFFE<Bus>:TEST:DATA
......................................................................... 1127
CONTrol<Ch>:RFFE<Bus>:TEST:CLOCk
.......................................................................1127
CONTrol<Ch>:RFFE<Bus>:TEST:VIO
............................................................................1127
CONTrol<Ch>:RFFE<Bus>:TEST:DATA:RANGe
............................................................. 1128
CONTrol<Ch>:RFFE<Bus>:TEST:CLOCk:RANGe
...........................................................1128
CONTrol<Ch>:RFFE<Bus>:TEST:VIO:RANGe
................................................................1128
CONTrol<Ch>:RFFE<Bus>:TEST:CLOCk:SHUNt?
.......................................................... 1128
CONTrol<Ch>:RFFE<Bus>:TEST:DATA:SHUNt?
.............................................................1128
SCPI command reference