Lucent Technologies LambdaUnite, Руководство по установке, Страница: 445 / 628

WaveStar
®
CIT remote login test via DCC
.................................................................................................................................................................................................................................
Overview
The test ensures the accessibility to all NEs via a DCC remote login.
Safety
CAUTION
ESD hazard
Electronic components can be destroyed by electrostatic discharge.
Always observe the ESD instructions (cf. “Electrostatic discharge” (p. 1-20) ).
Required equipment
Prior to performing this task, the following equipment must be available:
1. WaveStar
®
CIT PC
2. CAT5 crossover LAN cable with RJ-45/RJ-45 connectors (see chapter 4, Figure
4-48, “CIT connection (LAN crossed)” (p. 4-74) )
3. ESD Wrist Strap.
Prerequisites
Prior to performing this task, you must have done the following:
1. Configured the DCC channels of all used optical ports correctly (see section
“Provision DCC” (p. 10-12) ).
2. Logged in to WaveStar
®
CIT as Super User (see chapter 5, section “Starting the
WaveStar
®
CIT application” (p. 5-18) ) if WaveStar
®
CIT User Login has been
enabled during WaveStar
®
CIT installation.
3. Logged in to NE-A.
Network establishment and testing
.................................................................................................................................................................................................................................
365-374-187
Issue 1, December 2005 Lucent Technologies - Proprietary
See notice on first page
10-15