Lucent Technologies LambdaUnite, Руководство по установке, Страница: 449 / 628

Test setup
Checking the external timing references
Proceed as follows to check the external timing references in NE-A:
.................................................................................................................................................................................................
1
Connect the WaveStar
®
CIT PC to NE-A and perform an NE login as described in
chapter 7, section “NE login via OSI” (p. 7-7) .
.................................................................................................................................................................................................
2
In the WaveStar
®
CIT
System View
, select
View
→
Timing/Sync...
.
Result: The Synchronization Characteristics window appears.
.................................................................................................................................................................................................
3
Select the
External Reference 1
tab.
Figure 10-6 Line timing test setup
TI-A IN
TI-B IN
Tx
Rx
OP
Tx
Rx
OP
OP
Rx Tx
OP
Rx Tx
OP
Rx Tx
Tx
Rx
OP
OP
Rx Tx
Tx
Rx
OP
OP = Optical Pack
External clock
sources
NE-C
(Line timing)
NE-B
(Line timing)
NE-D
(Line timing)
NE-A
(External timing)
Network establishment and testing Line timing test setup
.................................................................................................................................................................................................................................
365-374-187
Issue 1, December 2005 Lucent Technologies - Proprietary
See notice on first page
10-19