Lucent Technologies LambdaUnite, Руководство по установке, Страница: 433 / 628

Network establishment
Overview
.................................................................................................................................................................................................................................
Purpose
This section provides a procedure for establishing a network via fiber connections from
NE to NE. Furthermore, it describes the required network provisioning that must be
done before performing the tests.
Assumption
The people carrying out the procedures described below are familiar with the
SDH/SONET functionality, the
WaveStar
®
CIT software and the handling of the test
equipment.
Related information
The fiber cabling and routing within a rack and an NE is described in chapter 4,
section
“Fiber cabling” (p. 4-77) .
An overview about all WaveStar
®
CIT-related tasks is given in the “ LambdaUnite
®
MSS User Operations Guide”.
If passive DWDM equipment is used please refer to Appendix B, “Passive WDM
(OEM equipment)” .
If DCM equipment is used please refer to Appendix C, “DCM (OEM equipment)” .
Contents
Connecting the fiber cables 10-4
Provision DCC 10-12
WaveStar
®
CIT remote login test via DCC 10-15
Line timing test setup 10-18
1+1 MSP/APS test setup 10-23
2-fiber MS-SPRing/BLSR test setup 10-29
4-fiber MS-SPRing/BLSR test setup 10-36
SNCP/UPSR test setup 10-43
Network establishment and testing
.................................................................................................................................................................................................................................
365-374-187
Issue 1, December 2005 Lucent Technologies - Proprietary
See notice on first page
10-3