Lucent Technologies LambdaUnite, Руководство по установке, Страница: 231 / 628

Connector data (TI-DS1 input, 100/110
Ω
)
The 100/110
Ω
DS1 station clock input cables have a 9-pin SUB-D connector (female).
Table 4-15 Pin assignment (DS1 station clock input cables, 100/110
Ω
)
Point on
connector Signal name Wire Wire color *1
2 Station-Clock Input Positive a-wire / Tip White
3 Station-Clock Input Negative b-wire / Ring Blue
4 Ground Screen
7, 8 Strap
Routing
The upper and lower subracks have the cabling on the rear side: the B cabling
(IN/OUT) to the left and the A cabling (IN/OUT) to the right.
Figure 4-40 Connector of the 100/110
Ω
DS1 station clock input cables
System cabling and final assembly TI-DS1 Station clock I/O interface (100/110
Ω
)
.................................................................................................................................................................................................................................
365-374-187
Issue 1, December 2005 Lucent Technologies - Proprietary
See notice on first page
4-65