Lucent Technologies LambdaUnite, Руководство по установке, Страница: 229 / 628

TI-DS1 Station clock I/O interface (100/110
Ω
)
.................................................................................................................................................................................................................................
Cable quantity
One input cable and one output cable are needed for each Timing Interface (TI).
Cable data (TI-DS1 output, 100/110
Ω
)
Length of pre-fabricated cables, shielded twisted pair 100/110
Ω
+ overall screen:
•
10 m [32.808 ft] Station clock output cable, TI–DS1 — CC109155580
•
25 m [82.021 ft] Station clock output cable, TI–DS1 — CC109155598
•
50 m [164.042 ft] Station clock output cable, TI–DS1 — CC109155606
•
75 m [246.063 ft] Station clock output cable, TI–DS1 — CC109164269
•
100 m [328.084 ft] Station clock output cable, TI–DS1 — CC109164277
•
125 m [410.105 ft] Station clock output cable, TI–DS1 — CC109187484
•
150 m [492.126 ft] Station clock output cable, TI–DS1 — CC109187492
•
175 m [574.147 ft] Station clock output cable, TI–DS1 — CC109187500
•
200 m [656.168 ft] Station clock output cable, TI–DS1 — CC109187518.
Connector data (TI-DS1 output, 100/110
Ω
)
The 100/110
Ω
DS1 station clock output cables have a 9-pin SUB-D connector (male).
Table 4-14 Pin assignment (DS1 station clock output cables, 100/110
Ω
)
Point on
connector Signal name Wire Wire color *1
2 Station-Clock Output Positive a-wire / Tip White
3 Station-Clock Output Negative b-wire / Ring Blue
Figure 4-39 Connector of the 100/110
Ω
DS1 station clock output cables
System cabling and final assembly
.................................................................................................................................................................................................................................
365-374-187
Issue 1, December 2005 Lucent Technologies - Proprietary
See notice on first page
4-63