BENSHAW Rsi S Series, Инструкция по эксплуатации

Страница: 360 / 398

Maintenance
348
Inspection
area Inspection item Inspection details Inspection method Judgment
standard
Inspection
equipment
and tighten all
screws.
Display Display device Is the display
value normal?
Check the
command value
on the display
device. Specified and
managed
values must
match. Voltmeter,
Ammeter, etc.
Bi-annual Inspections
Inspection
area Inspection item Inspection
details Inspection
method Judgment
standard Inspection
equipment
Motor Insulation
resistance Megger test
(between the
input, output
and earth
terminals). Disconnect the
cables for
terminals U/V/
W and test the
wiring. Must be above
5 MΩ DC 500 V Megger
Do not run an insulation resistance test (Megger) on the control circuit as it may result in damage to the
product.
Storage and Disposal
Storage
If you are not using the product for an extended period, store it in the following way:
•
Store the product in the same environmental conditions as specified for operation (refer to 1.3
Installation Considerations
).
•
When storing the product for a period longer than 3 months, store it between 10
˚
C and 30
˚
C, to
prevent depletion of the electrolytic capacitor.
•
Do not expose the inverter to snow, rain, fog, or dust.
•
Package the inverter in a way that prevents contact with moisture. Keep the moisture level
below 70% in the package by including a desiccant, such as silica gel.