BENSHAW Rsi S Series, Инструкция по эксплуатации

Страница: 119 / 398

Learning Advanced Features
107
Multi-keypad Setting
Use multi-keypad settings to control more than one inverter with one keypad. To use this function,
first configure RS-485 communication.
The group of inverters to be controlled by the keypad will include a master inverter. The master
inverter monitors the other inverters, and slave inverter responds to the master inverter’s input.
When using multi-function output, a slave inverter can select to use either the master inverter’s
output or its own output. When using the multi keypad, first designate the slave inverter and then
the master inverter. If the master inverter is designated first, connected inverters may interpret the
condition as a loss of communication.
Master Parameter
Group Code Name
LCD
Display
Parameter Setting
Setting
Range
Unit
CM 95
P2P
Communi
cation
selection
Int 485
Func
3
KPD-
Ready
0
–
3 -
CNF
03
Multi-
keypad ID Multi KPD
ID
3
3
–
99
-
42
Multi-
function
key
selection
Multi Key
Sel
4 Multi KPD 0
–
4 -
Slave Parameter
Group Code Name LCD Display Parameter Setting Setting Range Unit
CM
01 Station ID Int485 St ID 3 3
–
99 -
95
P2P communication
options
Int 485 Func 3 KPD-Ready 0
–
3 -
Multi-keypad Setting Details
Code Description
CM.01 Int485 St ID
Prevents conflict by designating a unique identification value to an inverter.
Values can be selected from numbers between 3
–
99.
CM.95 Int 485 Func Set the value to 3(KPD-Ready) for both master and slave inverter
CNF-03 Multi KPD ID Select an inverter to monitor from the group of inverters.
CNF-42 Multi key Sel Select a multi-function key type 4(Multi KPD) .
•
Multi-keypad (Multi-KPD) features work only with code version 1.00, IO S/W version 0.11, and
keypad S/W version 1.07 or higher versions.