BENSHAW Rsi S Series, Инструкция по эксплуатации

Страница: 60 / 398

Learning Advanced Features
48
Frequency Reference Configuration
The following is an example to demonstrate configuring a frequency reference of 30.05 (Hz) from
the first code in the Operation group (0.00).
0.00 30.00 30.05
ENT ENT ENT
Step Instruction
Keypad
Display
1
Ensure that the first code of the Operation group is selected, and the code 0.00
(Command Frequency) is displayed.
2
Press the [ENT] key.
The value, 0.00 will be displayed with the ‘0’ in the hundredths place value
flashing.
3
Press the [
◀
] key 3 times to move to the tens place.
The ‘0’ at the tens place will start to flash.
4
Press the [
▲
] key to change it to
‘
3
’
.
5
Press the [
▶
] key 3 times.
The ‘0’ at the hundredths place position will flash.
6
Press the [
▲
] key to change it to
‘
5
’
.
The parameter value will flash on the display.
7
Press the [ENT] key to save changes.
Flashing stops. The frequency reference has been configured to 30.05 Hz.
Note
•
A flashing number on the display indicates that the keypad is waiting for input from the user.
Changes are saved when the [ENT] key is pressed while the value is flashing. Changes will be
canceled if any other key is pressed.
•
The ”S” Series inverter keypad display can display up to 4 digits. However, 5-digit figures can be
used and are accessed by pressing the [
◀
] or [
▶
] key, to allow keypad input.
0.00
0.0’0’
‘0’0.00
30.00
30.0’0’
30.0’5’
30.05