BENSHAW Rsi S Series, Инструкция по эксплуатации

Страница: 76 / 398

Learning Advanced Features
64
Group Code Name LCD Display Parameter Setting Setting Range Unit
time constant
08
V1 minimum
input voltage
V1 volt x1 0.00 0.00–10.00 V
09
V1 output at
minimum
voltage (%)
V1 Perc y1 0.00 0.00–100.00 %
10
V1 maximum
input voltage
V1 Volt x2 10.00
0 .00– 12.00
V
11
V1 output at
maximum
voltage (%)
V1 Perc y2 100.00 0–100 %
16
Rotation
direction
options
V1
Inverting
0 No 0–1 -
17
V1 Quantizing
level V1
Quantizing
0.04
0.00*, 0.04–
10.00
%
* Quantizing is disabled if ‘0’ is selected.
0–10V Input Voltage Setting Details
Code Description
In.01 Freq at 100%
Configures the frequency reference at the maximum input voltage when a
potentiometer is connected to the control terminal block. A frequency set
with code In.01 becomes the maximum frequency only if the value set in
code In.11 (or In.15) is 100(%).
•
Set code In.01 to 60.00 and use default values for codes In.02–In.16.
Motor will run at 60.00Hz when a 10V input is provided at V1.
•
Set code In.11 to 50.00 (%) and use default values for codes In.01–In.16.
Motor will run at 30.00Hz (50% of the default maximum frequency–
60Hz) when a 10V input is provided at V1.
In.05 V1 Monitor[V] Configures the inverter to monitor the input voltage at V1.
In.07 V1 Filter
V1 Filter may be used when there are variations to the applied reference
frequency (i.e.noise filter). Variations can be mitigated by increasing the time
constant, but this will delay the response time when changing the reference
frequency.
The value t (time) indicates the time required for the frequency to reach 63%
of the reference, when external input voltages are provided in multiple
steps.