BENSHAW Rsi S Series, Инструкция по эксплуатации

Страница: 57 / 398

Learning Advanced Features
45
Setting Parameter Values
Follow the instructions below to set or modify parameter values.
Note
•
A flashing number on the display indicates that the keypad is waiting for an input from the user.
Changes will be saved when the [ENT] key is pressed while the number is flashing. The setting
change will be canceled if you press any other key.
•
Each code’s parameter values have default features and ranges specified. Refer to 8 on page 255
for information about the features and ranges before setting or modifying parameter values.
Step Instruction Keypad Display
1
Select the group and code to setup or
modify. Press the [ENT] key (The SET
LED will flash indicating Program mode).
The first number on the right side of the
display will flash.
2
Press the [
◀
] or [
▶
] key to move the
cursor to the number that you would like
to modify.
3
Press the [
▲
] or [
▼
] key to adjust the
value, and then press the [ENT] key to
confirm it.
The selected value will flash on the
display.
4
Press the [ENT] key again to save the
change.
-
)5.0 %.0 5.)
^.0
%.0
$.0
5.’0’