BENSHAW Rsi S Series, Инструкция по эксплуатации

Страница: 98 / 398

Learning Advanced Features
86
Acc/Dec Time Based on Operation Frequency – Setting Details
Code Description
bA.08
Ramp T Mode
Set the parameter value to 1 (Delta Freq) to set Acc/Dec times based on Maximum
frequency.
Configuration Description
0 Max Freq Set the Acc/Dec time based on Maximum
frequency.
1 Delta Freq Set the Acc/Dec time based on Operation
frequency.
If Acc/Dec times are set to 5 seconds, and multiple frequency references are used in
the operation in 2 steps, at 10Hz and 30 Hz, each acceleration stage will take 5
seconds (refer to the graph below).
Multi-step Acc/Dec Time Configuration
Acc/Dec times can be configured via digital input terminals by setting the ACC (acceleration time)
and dEC (deceleration time) codes in the Operation group.
Group Code Name LCD Display Parameter Setting Setting Range Unit
Operation
ACC Acceleration time Acc Time 20.0 0.0–600.0 sec
dEC Deceleration time Dec Time 30.0 0.0–600.0 sec
bA
70
–
82
Multi-step
acceleration time1
–
7
Acc Time 1
–
7 x.xx
0.0–600.0 sec
71
–
83
Multi-step
deceleration time1
–
7
Dec Time 1
–
7 x.xx 0.0–600.0 sec
In
65
–
69
Px terminal
configuration Px Define
(Px: P1–P5)
11 XCEL-L
0–54 - 12 XCEL-M
49 XCEL-H
89
Multi-step command
delay time
In Check Time 1 1–5000 ms