BENSHAW Rsi S Series, Инструкция по эксплуатации

Страница: 199 / 398

Learning Advanced Features
187
User Group Setting Details
Code Description
CNF-42
Multi-Key
Sel
Select 3(UserGrp SelKey) from the multi-function key setting options. If user group
parameters are not registered, setting the multi-function key to the user group select
key (UserGrp SelKey) will not display user group (USR Grp) item on the Keypad.
Follow the procedures below to register parameters to a user group.
No Procedure
1
Set CNF- 42 to 3(UserGrp SelKey). A icon will be displayed at the
top of the LCD display.
2 In the parameter mode (PAR Mode), move to the parameter you need
to register and press the [MULTI] key. For example, if the [MULTI] key
is pressed in the frequency reference in DRV 01 (Cmd Frequency), the
screen below will be displayed.
❶
Group name and code number of the parameter
❷
Name of the parameter
❸
Code number to be used in the user group. Pressing the
[PROG/ENT] key on the code number (40 Code) will register DRV-
01 as code 40 in the user group.
❹
Existing parameter registered as the user group code 40
❺
Setting range of the user group code. Entering 0 cancels the
settings.
3 Set a code number (
❸
to use to register the parameter in the user
group. Select code number and press [PROG/ENT] key.
4 Changing the value in
❸
will also change the value in
❹.
If no code is
registered, ‘Empty Code
’
will be displayed. Entering 0 cancels the
settings.
5 The registered parameters are listed in the user group in U&M mode.
You can register one parameter multiple times if necessary. For
example, a parameter can be registered as code 2, code 11, and more
in the user group.