BENSHAW Rsi S Series, Инструкция по эксплуатации

Страница: 97 / 398

Learning Advanced Features
85
Code Description
bA.09 Time scale
Use the time scale for all time-related values. It is particularly useful when a more
accurate Acc/Dec times are required because of load characteristics, or when the
maximum time range needs to be extended.
Configuration Description
0 0.01sec Sets 0.01 second as the minimum unit.
1 0.1sec Sets 0.1 second as the minimum unit.
2 1sec Sets 1 second as the minimum unit.
Note that the range of maximum time values may change automatically when the units are changed.
If for example, the acceleration time is set at 6000 seconds, a time scale change from 1 second to 0.01
second will result in a modified acceleration time of 60.00 seconds.
Acc/Dec Time Based on Operation Frequency
Acc/Dec times can be set based on the time required to reach the next step frequency from the
existing operation frequency. To set the Acc/Dec time values based on the existing operation
frequency, set bA. 08 (acc/dec reference) in the Basic group to 1 (Delta Freq).
Group Code Name LCD Display Parameter Setting Setting Range Unit
Operation
ACC Acceleration time Acc Time 20.0
0.0
–
600.0
sec
dEC Deceleration time Dec Time 30.0
0.0
–
600.0
sec
bA 08 Acc/Dec reference Ramp T Mode 1 Delta Freq 0–1 -