BENSHAW Rsi S Series, Инструкция по эксплуатации

Страница: 208 / 398

Learning Advanced Features
196
Code Description
10V represents 410VDC for 200V models and 820VDC
for 400V models.
4 Torque
Outputs the generated torque where 10V represents
250% of motor rated torque.
5 Ouput Power
Monitors output wattage. An output of 10V represents
200% of inverter rated output.
6 Idse
Outputs no load current (magnetizing current) where
10V represents 200% of no load current.
7 Iqse Outputs torque producing current where 10V
represents 250% of rated torque current.
=
!
− "
!
8 Target Freq Outputs the set target (reference) frequency where
10V is the maximum frequency (dr.20).
9 Ramp Freq Outputs the frequency calculated using the Acc/Dec
function. This may vary from the actual output
frequency.
12 PID Ref Value Outputs the reference (setpoint) value of a PID
controller where 6.6V represents 100%.
13 PID Fdk Value Outputs the feedback value of a PID controller where
6.6V represents 100%.
14 PID Output Outputs the PID output value of a PID controller where
10V represents 100%.
15 Constant Outputs OU.05 (AO1 Const %) value as a standard.
OU.02 AO1 Gain,
OU.03 AO1 Bias
Adjusts output value and offset. If frequency is selected as an output item, it will
operate as shown below.
#$1 =
%&
'(%
× #$1 )* + #$1 ,*-
The graph below illustrates the analog voltage output (AO1) changes depend
on OU.02 (AO1 Gain) and OU.3 (AO1 Bias) values. Y-axis is analog output
voltage (0
–
10V), and X-axis is % value of the output item.
Example, if the maximum frequency set at dr.20 (Max Freq) is 60Hz and the
present output frequency is 30Hz, then the x-axis value on the next graph is
50%.