BENSHAW Rsi S Series, Инструкция по эксплуатации

Страница: 67 / 398

Learning Advanced Features
55
Note
The instructions in the table are based on the factory default parameter settings. The inverter may not
work correctly if the default parameter settings are changed after the inverter is purchased. In such
cases, initialize all parameters to reset the factory default parameter settings before following the
instructions in the table (refer to 5.23
on page 183 ).
Monitoring the Operation
Output Current Monitoring
The following example demonstrates how to monitor the output current in the Operation group
using the keypad.
Step Instruction Keypad Display
1
Ensure that the first code of the Operation group is selected,
and the code 0.00 (Command Frequency) is displayed.
2
Press the [
▲
] or [
▼
] key to move to the Cur code.
3
Press the [ENT] key.
The output current (5.0A) is displayed.
4
Press the [ENT] key again.
Returns to the Cur code.
CUR 5.0
ENT
ENT
DEC
ACC
0.00
0.00
cur
5.0
cur