BENSHAW Rsi S Series, Инструкция по эксплуатации

Страница: 365 / 398

353
Technical Specification
3-Phase 480V, 0.5 HP – 10 HP (0.4 – 7.5 kW)
Model RSI-xxx-SS-4-C 000.5 001 002 003 005 007 010
Applied
motor
Heavy
load
HP 0.5 1.0 2.0 3.0 5.0 7.5
10
kW 0.4 0.75 1.5 2.2 3.7 5.5 7.5
Normal
load
HP 1.0 2.0 3.0 5.0 5.4 10 15
kW 0.75 1.5 2.2 3.7 4.0 7.5 11
Rated
output
See
Warning
Rated
capacity
(kVA)
Heavy
load
1.0 1.9 3.0 4.2 6.1 9.1 12.2
Normal
load
1.5 2.4 3.9 5.3 7.6 12.2 17.5
Rated
current [3-
Phase
input] (A) Heavy
load 1.3 2.5 4.0 5.5 8.0 12 16
Normal
load 2.0 3.1 5.1 6.9 10.0 16 23
Rated
current
[Single-
Phase
input] (A) Heavy
load 0.8 1.5 2.3 3.1 4.8 7.1 9.5
Normal
load 1.3 1.9 3.0 3.9 5.9 9.5 14
Output frequency 0-400 Hz (IM Sensorless: 0-120 Hz)
Output voltage (V) 3-phase 380-480VAC (-15% to +10%)
Single phase 480VAC(-5% to +10%)
Rated
input Working voltage (V)
50-60 Hz ( ± 5%)
(In case of single phase input, input frequency is only 60Hz( ± 5%).)
Input frequency
50-60 Hz (
±
5%)
Rated
current (A) Heavy
load 1.1 2.4 4.2 5.9 8.7 12.9 17.5
Normal
load 2.0 3.3 5.5 7.5 10.8 17.5 25.4
Weight (lb /kg) w/EMC filter 2.6/1.18 2.6/1.18 3.9/1.77 4/1.80 4.9/2.23 7.3/3.3 7.5/3.4
•
The standard motor capacity is based on a standard 4-pole motor.
•
The standard used for 200 V inverters is based on a 240 V supply voltage, and for 400V
inverters is based on a 480 V supply voltage.
•
The rated output current is limited based on the carrier frequency set at Cn.04.
•
The output voltage becomes 20~40% lower during no-load operations to protect the
inverter from the impact of the motor closing and opening (0.4~4.0kW models only).
•
Warning – 480V units only - When using single phase input, the built-in EMC filter
must be disconnected. See section 2.2, Cable Wiring, Step 6.