BENSHAW Rsi S Series, Инструкция по эксплуатации

Страница: 103 / 398

Learning Advanced Features
91
Stopping the Acc/Dec Operation
Configure a digital input terminal to stop acceleration or deceleration and operate the inverter at a
fixed frequency.
Group Code Name LCD Display Parameter Setting Setting Range Unit
In
65
–
69
Px terminal
configuration Px
Define(Px:
P1
–
P5)
25 XCEL Stop 0
–
54
-
V/F(Voltage/Frequency) Control
Configure the inverter’s output voltages, gradient levels and output patterns to achieve a target
output frequency with V/F control. The amount of of torque boost used during low frequency
operations can also be adjusted.
Linear V/F Pattern Operation
A linear V/F pattern configures the inverter to increase or decrease the output voltage at a fixed rate
for different operation frequencies based on V/F characteristics. A linear V/F pattern is partcularly
useful when a constant torque load is applied.
Group Code Name LCD Display Parameter Setting Setting Range Unit
dr 09 Control mode Control Mode 0 V/F 0–4 -
18 Base frequency Base Freq 60.00 30.00–400.00 Hz
19 Start frequency Start Freq 0.50 0.01–10.00 Hz
bA 07 V/F pattern V/F Pattern 0 Linear 0–3 -
Linear V/F Pattern Setting Details
Code Description
dr.18 Base Freq
Sets the base frequency. A base frequency is the
inverter’s output frequency when running at its
rated voltage. Refer to the motor’s name plate to
set this parameter value.
Px
Frequency
Run cmd