BENSHAW Rsi S Series, Инструкция по эксплуатации

Страница: 59 / 398

Learning Advanced Features
47
Application Examples
Acceleration Time Configuration
The following is an example demonstrating how to modify the ACC (Acceleration time) code value
(from 5.0 to 16.0) from the Operation group.
ACC
0.00
5.0 16.0
ENT
ENT
ENT
Step Instruction Keypad Display
1
Ensure that the first code of the Operation group is displayed and
code 0.00 (Command Frequency) is displayed.
2
Press the [
▲
] key.
The display will change to the second code in the Operation
group, the ACC (Acceleration Time) code.
3
Press the [ENT] key.
The number ‘5.0’ will be displayed, with ‘0’ flashing. This indicates
that the current acceleration time is set to 5.0 seconds. The
flashing value is ready to be modified by using the keypad.
4
Press the [
◀
] key to move to the left.
‘
5’ will be flashing now. This indicates the flashing value, ‘5’ is
ready to be modified.
5
Press the [
▲
] key to change the number
‘
5
’
to
‘
6
’
, in the one’s
place.
6
Press the [
◀
] key to move to the tens place.
The number in the tens position, ‘0’ in ‘06’ will start to flash
7
Press the [
▲
] key to change the number from
‘
0
’
to
‘
1
’
, to
match the tens place and then press the [ENT] key.
Both digits will flash on the display.
8
Press the [ENT] key once again to save changes.
‘
ACC’ will be displayed. The change to the acceleration time
setup has been completed.
0.00
acc
5.’0’
‘5’.0
‘6’.0
‘0’6.0
‘16’.0
acc