BENSHAW Rsi S Series, Инструкция по эксплуатации

Страница: 58 / 398

Learning Advanced Features
46
Configuring the [ESC] Key
The [ESC] key is a multi-functional key that can be configured to carry out a number of different
functions. Refer to 4.6
Local/Remote Mode Switch for more information about the other functions of
the [ESC] key. The following example shows how to configure the [ESC] key to perform a jog
operation.
Step Instruction Keypad Display
1
Ensure that you are currently at the first code of the Operation
group, and that code 0.00 (Command Frequency) is displayed.
2
Press the [
▶
] key.
You have moved to the initial code of the Drive group (dr.0).
3
Press the [
▲
] or [
▼
] key to select code dr.90 (ESC key
configuration), and then press the [ENT] key.
Code dr.90 currently has an initial parameter value of 0.
4
Press the [
▲
] key to modify the value to 1 (Jog key) and then
press the [ENT] key.
The new parameter value will flash.
5 Press the [ENT] key again to save changes. -
Note
•
If the code dr. 90 (ESC key configuration) is set to 1 (JOG Key) or 2 (Local/Remote), the SET
indicator will flash when the [ESC] key is pressed.
•
The factory default setting for code dr. 90 is 0 (move to the initial position). You can navigate back
to the initial position (code 0.00 of the Operation group) immediately, by pressing the [ESC] key
while configuring any codes in any groups.
DR.90 ) !
ENT
ENT
DR. 2
DR. 0 0.00
0.00
dr.0
0
dr.90
‘1’