BENSHAW Rsi S Series, Инструкция по эксплуатации

Страница: 221 / 398

Learning Advanced Features
209
Code Description
23 Spd Limit If the speed limit setting (Cn.62) on torque control
mode is set to a value other than keypad (0 or 1),
the speed limit setting is displayed.
24 Load Speed Displays the speed of a load in the desired scale
and units. Displays the speed of a load that
ADV-61 (Load Spd Gain) and ADV-62 (Load Spd
Scale) are applied as rpm or mpm set at ADV-63
(Load Spd Unit).
CNF-21–
23
Monitor
Line-x
Select the items to be displayed in monitor mode. Monitor mode is the first displayed
mode when the inverter is powered on. A total of three items, from monitor line-1 to
monitor line- 3, can be displayed simultaneously.
CNF-24
Mon
Mode Init
Selecting 1(Yes) initializes CNF-20
–
23.
Load Speed Display Setting
Group Code Name
LCD
Display
Parameter Setting
Setting
Range
Unit
ADV(M2)
61(40)
Rotation
count
speed gain
Load Spd
Gain
- 100.0
1~6000.0[
%]
-
62(41)
Rotation
count
speed
scale
Load Spd
Scale
0 x 1 0~4 Hz
63(42)
Rotation
count
speed unit
Load Spd
Unit
2 rpm 0~1 A
Load Speed Display Setting Detail
Code Description
ADV-61(M2-40)
Load Spd Gain
If monitoring item 24 Load Speed is selected and if the motor spindle and
the load are connected with belt, the actual number of revolutions can be
displayed by calculating the pulley ratio.
ADV-62(M2-41)
Load Spd Scale
Selects the decimal places that monitoring item 24 Load Speed displays
(from x1–x0.0001).
ADV-63(M2-42)
Load Spd Unit
Selects the unit of monitoring item 24 Load Speed. Selects between RPM
(Revolution Per Minute) and MPM (Meter Per Minute) for the unit.
For example, if line speed is 300 [mpm] at 800 [rpm], set ADV61 (Load Spd
Gain) to "37.5%" to display the line speed. Also, set ADV62 (Load Sped