BENSHAW Rsi S Series, Инструкция по эксплуатации

Страница: 90 / 398

Learning Advanced Features
78
Fwd/Rev Command by Multi-function Terminal – Setting Details
Code Description
Operation group
drv– Cmd Source
Set to 1(Fx/Rx-1).
In.65–71 Px Define
Assign a terminal for forward (Fx) operation.
Assign a terminal for reverse (Rx) operation.
Terminal Block as a Command Input Device (Run and Rotation
Direction Commands)
The digital inputs can be selected to operate as the start/stop source along with direction of
rotation. This is configured by setting the drv (command source) code in the Operation group to
2(Fx/Rx-2). Select 2 terminals for run and rotation direction commands, codes In.65
–
69 for P1
–
P5
to 1(Fx) and 2(Rx) respectively. This application uses the Fx input as a run command while the Rx
input determines the motor’s rotation direction.
Group Code Name LCD Display
Parameter
Setting Setting
Range
Unit
Operation
Drv Command
source Cmd
Source* 2 Fx/Rx-2
0
–
5 -
In
65
–
69
Px terminal
configuration Px Define
(Px: P1 – P5) 1 Fx
0
–
54 -
2 Rx
* Displayed under DRV-06 on the LCD keypad.
Run Command and Fwd/Rev Change Command Using Multi-function Terminal – Setting Details
Code Description
Operation group
drv Cmd Source
Set to 2(Fx/Rx-2).
In.65–71 Px Define
Assign a terminal for run command (Fx).
Assign a terminal for changing rotation direction (Rx).
FX
RX
Frequency reference