BENSHAW Rsi S Series, Инструкция по эксплуатации

Страница: 130 / 398

Learning Advanced Features
118
Fire Mode Function Setting Details
Code Description Details
Ad.81 Fire Mode
frequency Fire mode frequency
reference
The frequency set at Ad. 81 (Fire mode frequency) is
used for the inverter operation in Fire mode. The Fire
mode frequency takes priority over the Jog frequency,
Multi-step frequencies, and the keypad input
frequency.
Dr.03 Acc Time /
Dr.04 Dec Time
Fire mode Acc/Dec
times
When Fire mode operation is turned on, the inverter
accelerates for the time set at Dr.03 (Acc Time), and
then decelerates based on the deceleration time set at
Dr.04 (Dec Time). It stops when the Px terminal input
is turned off (Fire mode operation is turned off).
PR.10 Retry Delay Fault process
Some faults are ignored during Fire mode operation.
The fault history is saved, but trip outputs are disabled
even when they are configured at the multi-function
output terminals.
Faults that are ignored in Fire mode
BX, External Trip, Low Voltage Trip, Inverter
Overheat, Inverter Overload, Overload, Electrical
Thermal Trip, Input/Output Open Phase, Motor
Overload, Fan Trip, No Motor Trips, and other minor
faults.
For the following faults, the inverter performs a Reset
and Restart until the trip conditions are released. The
retry delay time set at PR. 10 (Retry Delay) applies
while the inverter performs a Reset and Restart.
Faults that force a Reset Restart in Fire mode
Over Voltage, Over Current1(OC1), Ground Fault
The inverter stops operating when the following faults
occur:
Faults that stop inverter operation in Fire mode
H/W Diag, Over Current 2 (Arms-Short)