BENSHAW Rsi S Series, Инструкция по эксплуатации

Страница: 182 / 398

Learning Advanced Features
170
Group Code Name
LCD
Display
Parameter Setting Unit
maximu
m analog
input 100%
CNF*
21
Monitor
mode
display 1
Monitor
Line-1
1 Speed
22
Monitor
mode
display 2
Monitor
Line-2
2
Output
Current
23
Monitor
mode
display 3
Monitor
Line-3
3
Output
Voltage
*Available on LCD keypad only.
Torque reference setting details
Code Description
dr-08
Select an input method to use as the torque reference.
Parameter Setting Description
0 Keypad-1 Sets the torque reference with the
keypad.
1 Keypad-2
2,4,5 V1,V2,I2 Sets the torque reference using the
voltage or current input terminal of
the terminal block.
6 Int 485 Sets the torque reference with the
communication terminal of the
terminal block.
8 FieldBus Input the torque reference using the
inverter's FieldBus option.
9 UserSeqLink Enters torque reference by linking
common area with the user
sequence output.
12 Pulse Input the torque reference using the
pulse input on the inverter's
terminal block.
Cn-02
The torque reference can be set up to 180% of the maximum rated motor
torque.
In-02
Sets the maximum torque. You can view the torque reference in Monitor (MON)
mode. Set one of CNF.21 ~ CNF.23.
CNF-21–
23
Select a parameter from the Config (CNF) mode and then select(19 Torque Ref).