BENSHAW Rsi S Series, Инструкция по эксплуатации

Страница: 195 / 398

Learning Advanced Features
183
Group Code Name LCD Display Parameter Setting Setting Range Unit
bA 19
Input power
voltage
AC Input Volt
240V 240 170–240
V
480V 480 320–480
Read, Write, and Save Parameters
Use read, write and save function parameters on the inverter to copy parameters from the inverter
to the keypad or from the keypad to the inverter.
Group Code Name LCD Display Parameter Setting Setting Range Unit
CNF*
46 Parameter read Parameter Read 1 Yes - -
47 Parameter write
Parameter
Write
1 Yes - -
48 Parameter save Parameter Save 1 Yes - -
*Available on LCD keypad only.
Read, Write, and Save Parameter Setting Details
Code Description
CNF-46
Parameter Read Copies saved parameters from the inverter to the keypad. Saved parameters on
the keypad will be deleted and replaced with copied parameters.
CNF-47
Parameter Write
Copies saved parameters from the keypad to the inverter. Saved parameters on
the inverter will be deleted and replaced with copied parameters. If an error occurs
during parameter writing, previous saved data will be used. If there is no saved data
on the Keypad,
‘
EEP Rom Empty
’
message will be displayed.
CNF-48
Parameter Save
As parameters set during communication transmission are saved to RAM, the
setting values will be lost if the power goes off and on. When setting parameters
during communication transmission, select 1 (Yes) from CNF-48 code to save the
set parameter.
Parameter Initialization
User changes to parameters can be initialized (reset) to factory default settings on all or selected
groups. However, during a fault or during operation, parameters cannot be initialized.
Group Code Name LCD Display
Parameter
Setting Setting
Range
Unit
dr* 93
Parameter
initialization
- 0 No
0
–
16
CNF** 40
Parameter
initialization Parameter
Init
0 No 0
–
16
* For keypad **For LCD keypad