BENSHAW Rsi S Series, Инструкция по эксплуатации

Страница: 239 / 398

227
Learning Protection Features
Trip Status Reset
After a fault, the inverter can be reset using the keypad [Stop/Reset] key or a digital input terminal.
Group Code Name LCD Display Parameter Setting Setting range Unit
In 65-71 Px terminal
setting options Px Define(P1-P5) 3 RST - -
Trip Status Reset Setting Details
Code Description
In.65-71 Px Define Set the digital input terminal to 3 (RST) and activate the terminal to reset the
fault. A reset can also be done by pressing the [Stop/Reset] key on the keypad.
Operation Mode on Option Card Trip
Option card trips may occur when an option card is used with the inverter.
Set the operation mode
for the inverter when a communication error occurs between the option card and the inverter, or when
the option card is detached during operation.
Group Code Name LCD Display Parameter
Setting Setting
range Unit
Pr 80 Operation mode
on option card
trip Opt Trip
Mode 0 None 0-3 -
1 Free-Run
2 Dec
Operation Mode on Option Trip Setting Details
Code Description
Pr.80 Opt Trip Mode Setting Function
0 None No operation
1 Free-Run
The inverter output is blocked and fault information
is shown on the keypad.
2 Dec
The motor decelerates to the value set at Pr.07 (Trip
Dec Time).
No Motor Trip
If the inverter is running and the output current drops below Pr.32, No Motor Level for the Pr.33, No
Motor Time, or when the motor is disconnected from the inverter, a ‘no motor trip’ occurs.
Group Code Name LCD Display Parameter Setting Setting
range
Unit
Pr 31 Operation on no
motor trip No Motor Trip 0 None - -
32 No motor trip
current level No Motor
Level 5 1-100 %