BENSHAW Rsi S Series, Инструкция по эксплуатации

Страница: 138 / 398

Learning Advanced Features
126
Code Description
dr.13 JOG Dec Time Set the deceleration speed.
When the drive is running (FX command applied) and a digital input is applied to the jog terminal,
the operation frequency changes to the jog frequency and the jog operation begins.
Jog Operation 2-Fwd/Rev Jog by Multi-function Terminal
When using jog operation 1, a run command must also be applied along with the jog input. When
using jog operation 2, a digital input terminal that is set for a forward or reverse jog also starts the
inverter. The settings for JOG frequency and JOG Acc/Dec times are the same as jog operation 1.
Jog operation 2 also overrides the other operating modes (3-wire, up/down, etc.). If a different
operation command is entered during a jog operation, it is ignored and the operation maintains the
jog frequency.
Group Code Name LCD Display Parameter
setting Setting Range Uni
t
dr 11 Jog frequency JOG
Frequency 10.00 0.50-Maximum
frequency Hz
12 Jog operation
acceleration time JOG Acc
Time 20.00 0.00-600.00 sec
13 Operation
deceleration time JOG Dec
Time 30.00 0.00-600.00 sec
In 65-69 Px terminal
configuration Px Define(Px:
P1-P5) 46 FWD
JOG - -
47 REV JOG
(JOG)
dr.11
dr.13 ACC/dr.03
(FX)
(JOG)
dr.11
dr.12 dEC/dr.04
(FX)
Run cmd
Jog cmd
Operation
frequency
Jog frequency
Acc. time
Operation frequency > Jog frequency
Jog dec. time
Run cmd
Jog cmd
Operation
frequency
Jog frequency
Dec. time
Operation frequency < Jog frequency
Jog acc. time