BENSHAW Rsi S Series, Инструкция по эксплуатации

Страница: 55 / 398

Learning Advanced Features
43
Learning to Use the Keypad
The keypad enables movement between groups of parameters and the parameters within each
group. At code level, you can set parameter values and turn on or off specific functions. Refer to 8
on page
255
to find the functions you need.
Confirm the correct values (or the correct range of the values), and then follow the examples below
to configure the inverter with the keypad.
Group and Code Selection
Follow the examples below to switch between groups and codes.
Step Instruction Keypad Display
1
Move to the group you
want using the [
◀
] and
[
▶
] keys.
2
Move up and down
through the codes using
the [
▲
] and [
▼
] keys
until you locate the
code that you require.
Note
For some settings, pressing the [
▲
] or [
▼
] key may skip choices . This is because certain code numbers
have been intentionally left blank (or reserved) for new functions to be added in the future. Also some
features may have been hidden (disabled) because a certain code has been set to disable the functions
for relevant codes.
CM
AP IN
UF DR
0.00
PR CN
US BA
M2 AD
OU
0.00
DEC
DRC
ACC
0.00