![background image](http://html1.mh-extra.com/html/zeiss/lsm-510/lsm-510_manual_3415651077.webp)
LSM 510
OPERATION IN EXPERT MODE
LSM 510 META
Switching on the System
Carl Zeiss
03/06
B 45-0021 e
4-15
Scan New Images
Clicking on this button activates the complete LSM hardware (on-
line mode).
Please
note
that
the
Scan New Images
button must be
activated before setting up the Routine Mode or the Expert
Mode. Otherwise, the hardware can not be controlled by
the LSM 5 software.
Use Existing Images
This item allows you to process and analyze previously acquired
images with the LSM 5 software. In this mode, control of the
hardware (laser module ...) is not possible (off-line mode).
Start Routine Mode
Click on this button if you want to work with pre-configured system
settings (typical applications).
Start Expert Mode
Use of this mode requires to be thoroughly familiar with the exact
microscope procedures and interrelations.
In the Expert mode you need to set all parameters and
functions upon your own decision; this mode therefore
provides you with the greatest flexibility of operation. It is
also possible, however, to call up stored configurations and
to modify the parameters / settings if necessary.
After the start of the
Expert Mode
or the
Routine Mode
,
instrument initialization is
performed and can be monitored in the
Initialization
window and interrupted with a click
on the
Cancel
button, if required.
Depending on the selected option (
Scan New
Images
or
Use existing Images
), initialization is
performed in the offline or online mode.
Existing images can only be loaded and
processed in the
Expert Mode
.
If you want to change from the
Expert
Mode
to the
Routine Mode
and vice
versa, close all the windows first.
Fig. 4-5
OFF LINE Initialization window