Zeiss LSM 510 Manual Download Page 322

Page: 322 / 606

OPERATION IN EXPERT MODE

LSM 510

DuoScan

Carl Zeiss

Display and Analysis of Images

LSM 510 META

DuoScan

4-260

B 45-0021 e

03/06

4.13.8

Select - Palette

This function allows to

−

change the palette used for displaying the image(s)

−

define and save new palettes

−

delete palettes by removing them

Click on

Palette

will display the

Palette

toolbar. Any changes done with this toolbar are effective

immediately.

The standard palettes

No palette

Range indicator,

Glow Scale

and Rainbow are system palettes and

can not be deleted.

The

Range indicator

palette is useful to optimize the gain and offset setting of images in the

Scan

control

window before scanning.

Palettes are stored and retrieved together with the images when archived in the

Image Database

•

Click on the

Palette

button in the

Select

toolbar.

−

The

Color Palette

window will be displayed.

•

Select the required palette from the

Color Palette List

panel by clicking on the relevant name.

•

If you want to deactivate a palette selected before, click on

No Palette

in the

Color Palette List

panel.

•

Click on the

Close

button to close the

Color Palette

window.

•

A changed image can be stored via the

Save As

function.

In the

Options

menu in the function

Settings

it is possible to switch to

Mono

automatically when a

palette is activated and to

Colour

on deactivation of a palette.

In addition it is possible to activate / deactivate

Mono

in the

Channel

toolbar.

Some of the handling functions of the

Image Display

window toolbars can be activated at the opening

of a new

Image Display

window.

Summary of Contents for LSM 510































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LSM 510

Reviews:

Related manuals for LSM 510

Brands by name

Popular brands

Zeiss LSM 510, Manual

Search results

Summary of Contents for LSM 510

Reviews:

Related manuals for LSM 510

Brands by name

Popular brands