Zeiss LSM 510, Manual

Page: 27 / 606

LSM 510 NOTES ON DEVICE SAFETY
LSM 510 META User Interface Carl Zeiss
03/06
B 45-0021 e 1-23
•
Loosen the screws on the port to the microscope for Axiovert 200 M (Fig. 1-17/ 1 ) or to the tube on
Axio Imager.Z1 and Axioskop 2 FS
MOT
(Fig. 1-18/ 1 ).
Fig. 1-17 Port connection between LSM and
Axiovert 200 M Fig. 1-18 Fastening screws of the scan
head at the front of the tube
on Axioskop 2 FS
MOT
and
Axio Imager.Z1
•
Slowly pull the scan head away from the microscope port or the tube. For mounting the scan head
onto a microscope, make sure the pins and the electronic connections of the safety interface match
closely. Fasten the screws on the front of the tube (Fig. 1-18/
1 ) or at the microscope port (Fig. 1-17/ 1 )
followed by fastening the screw on the back of the scan head (Fig. 1-15/ 1 and Fig. 1-16/ 1 ).
•
Use the three fastening screws (Fig. 1-19/ 1 ) to attach or detach the LSM DuoScan to or from the
microscope stand.
Fig. 1-19 Fastening screws and connections on LSM DuoScan