LSM 510
LSM 510 AND LSM 510 META - SETUP REQUIREMENTS
LSM 510 META
Space Requirements
Carl Zeiss
03/06
B 45-0021 e
2-3
2.1.2
LSM on small system table (one microscope, upright or inverted): 2 m x 3,5 m
Fig. 2-2
Space requirements for LSM on small system table
(measurements in mm)
The System Electronic Rack contains all electronics for control of the hardware components of the
LSM system, the power supply for the microscope, the scanning unit, the Laser Module V and the
Laser Module RGB equipped with the choice of lasers. The Laser Module RGB is set on top of the System
Electronic Rack.
On this table the extension of the system with LSM
DuoScan
is not possible!
