background image

MULTIPHOTON LASER SCANNING MICROSCOPY 

LSM 510 META NLO 

References 

Carl Zeiss 

 

 
 
03/06 

B 45-0021 e 

9-27 

9.5 References 

Albota, M., Beljonne, D., Bredas, J.L., Ehrlich, J.E., Fu, J.Y., Heikal, A.A., Hess, S.E., Kogej, T., Levin, M.D., 
Marder, S.R., McCord-Maughon, D., Perry, J.W., Rockel, H., Rumi, M., Subramaniam, C., Webb, W.W., 
Wu, X.L., Xu, C. Design of organic molecules with large two-photon absorption cross sections. Science 
281, 1653-1656. 

 

Diels, J.C. and Rudolph, W. (1995) Ultrashort Laser Pulse Phenomena: fundamentals, techniques, and 
applications on a femtosecond time scale, San Diego: Academic Press Inc. 

 

Haugland, R. (1996) Handbook of Fluorescent Probes and Research Chemicals. M.T.Z. Spence, ed., 
Eugene, OR: Molecular Probes. 

 

Patterson, G. H. and Piston, D. W. (2000) Photobleaching in two-photon excitation microscopy. Biophys. 
J. 78, 2159-2162. 

 

Kempe, M. (1993) Impact of chromatic and spherical aberration on the focusing of ultrashort light pulses 
by lenses, Opt. Lett, 18, 137-139. 

 

König, K., Simon, U., Halbhuber, K-J (1996) 3D Resolved Two-Photon Fluorescence Microscopy of Living 
Cells Using a Modified Confocal Laser Scanning Microscope, Cellular and Molecular Biology 42, 1181-
1194. 

 

Netz, R., Feurer, T., Wolleschensky, R. and Sauerbrey, R. (2000) Measurement of the pulse-front 
distortion in high numerical aperture lenses, Appl. Phys. B-Lasers, 70,833-837. 

 

Rumi, M., Ehrlich, J.E., Heikal, A.A., Perry, J.W., Barlow, S., Hu, Z, McCord-Maughon, D., Parker, T., 
Röckel, H., Thayumanavan, S., Marder, S., Beljonne, D and Brédas J-L. (2000) Structure-Property 
Relationships for Two-Photon Absorbing 

 

Chromophores: Bis-Donor Diphenylpolyene and Bis(styryl)benzene Derivatives J. Am. Chem. Soc. 122, 
9500-9510. 

 

Squirrell, J.M., Wokosin, D.L., White, J.G. and Bavister, B.D. (1999) Long-term two-photon fluorescence 
imaging of mammalian embryos without compromising viability. Nature Biotechnology 17, 763-767. 

 

Wolleschensky, R., Feurer T., Sauerbrey R., and Simon I. (1998) Characterization and optimization of a 
laser-scanning microscope in the femtosecond regime. Applied Physics B-Lasers and Optics 67, 87-94. 

 

Wolleschensky, R., Dickinson, M.E. and Fraser, S.E. (2002) Group-Velocity Dispersion and Fiber Delivery in 
Multiphoton Laser Scanning Microscopy. In, Confocal and Two-photon Microscopy: Foundations, 
Applications, and Advances. Ed. A. Diaspro. New York: Wiley-Liss, Inc. 

Summary of Contents for LSM 510































































































































































































































































































































































































































































































































































































































Reviews: