Zeiss LSM 510 Manual Download Page 306

Page: 306 / 606

OPERATION IN EXPERT MODE

LSM 510

DuoScan

Carl Zeiss

Window Menu

LSM 510 META

DuoScan

4-244

B 45-0021 e

03/06

4.11 Window

Menu

The

Window

menu includes the additional functions

Full Screen

Close All Image Windows

Toolbar

and

Scan Information

which are not available from a toolbar.

4.11.1 Full

Screen

This function shows the active

Image Display

window in full screen size.

•

Activate the image to be shown in full size by clicking on the image content.

•

Click on the term

Window

in the menu bar of the

Main

menu.

−

The

Window

menu (pull-down) will be opened.

•

Click on the

Full Screen

line.

−

The image will be displayed in full screen size.

•

Click in the image to show it again as an

Image Display

window in normal size.

4.11.2

Close All Image Display Windows

This function closes all the opened

Image Display

windows.

•

Open the

Window

menu.

•

Click on the

Close All Image Windows

line.

−

All the opened

Image Display

windows will be closed.

In the

Options

menu in the function

Settings

in tab

Save

at position

Save prompt at closing

modified windows

it can be determined whether a prompt is shown on

Closing of All Image Display

Windows

or not.

Fig. 4-244

Window menu

Summary of Contents for LSM 510































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LSM 510

Reviews:

Related manuals for LSM 510

Brands by name

Popular brands

Zeiss LSM 510, Manual

Search results

Summary of Contents for LSM 510

Reviews:

Related manuals for LSM 510

Brands by name

Popular brands