Zeiss LSM 510, Manual

Page: 463 / 606

LSM 510 Tools
LSM 510 META Change Filters Carl Zeiss
03/06
B 45-0021 e 6-21
Add New
This function permits new filter sets to be added to
the database.
For this, proceed as follows:
•
Click on the Add New button on the Edit
Filter/Beam Splitter List window.
−
The Add New Filter/Beam Splitter
window is opened.
•
Enter the data of the new filter set in the Filter
Cubes Stand Description panel, then click on
the Apply button.
The new filter set is stored in the database and
included in the
New Filter Cubes Stand panel.
You can now activate the filter for a filter wheel
position using the procedure described above.
If you have activated the Non Zeiss check
box, filter sets from other manufacturers
can also be included in the database.
•
To remove an new filter set from the database, select it with a click of the mouse in the New Filter
Cubes Stand panel and then click on Remove .
•
Click on Close to close the Add New Filter/Beam Splitter window.
•
Click on Close to close the Edit Filter/Beam Splitter List window.
•
Click on the Store button to accept the new settings.
•
Click on the Close button to close the Emission Filter & Beam Splitter Control window.
When you start the LSM 510 software, the filter data are updated.
Fig. 6-27 Edit Filter/Beam Splitter List
window