Zeiss LSM 510 Manual Download Page 346

Page: 346 / 606

OPERATION IN EXPERT MODE

LSM 510

DuoScan

Carl Zeiss

Display and Analysis of Images

LSM 510 META

DuoScan

4-284

B 45-0021 e

03/06

Overlap coefficient, overlap coefficient after Manders

(Manders, Verbeek and Aten, J. Microscopy 169:375-382, 1993)

∑

)

(

)

(

−

Another parameter used to quantify colocalization in image pairs

−

Insensitive to differences in signal intensities between the two channels, photo-bleaching or
amplifier settings

−

Value range 0 – 1 (0: no colocalization, 1:all pixels colocalize)

4.13.21

Display - Profile

4.13.21.1 Function

This function allows to

−

display the intensity distribution of an image along a straight or curved line

−

show the intensity values in table form and copy table to clipboard or save as text file

−

show separate profiles for each channel in a multi channel image

The settings of

Chan

Zoom

Slice

Contr

and

Palette

are applied.

Click on

Profile

will display the

Profile

toolbar. Any changes done with this toolbar are effective

immediately. The content of the overlay plane is temporarily deleted while the toolbar is displayed.

•

Click on the

Profile

button. The

Profile

toolbar will be displayed.

−

The intensity curves are shown in a graph below the image(s).

•

On the

Profile

toolbar you can select the width and color of the profile line.

•

You can place two markers on the profile line to measure differences in intensities and distances in the
XY plane.

The

Profile

button can also be used online during scanning.

•

Click on the

Diagr. in Image

button to see an intensity graph superimposed on the image.

Summary of Contents for LSM 510































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LSM 510

Reviews:

Related manuals for LSM 510

Brands by name

Popular brands

Zeiss LSM 510, Manual

Search results

Summary of Contents for LSM 510

Reviews:

Related manuals for LSM 510

Brands by name

Popular brands