Zeiss LSM 510, Manual

Page: 29 / 606

LSM 510 NOTES ON DEVICE SAFETY
LSM 510 META User Interface Carl Zeiss
03/06
B 45-0021 e 1-25
To ensure functioning of the system and laser safety the following connections have to be changed:
1. The connection of the microscope to the safety interface of the system is located either on the
additional Safety-Box (Axioskop 2 FS
MOT
, Fig. 1-22/ 1 ) or on the rear side of the microscope (Axiovert
200 M or Axio Imager.Z1; Fig. 1-23/ 1 and Fig. 1-24/ 1 ). This connection has to be unplugged from
the microscope which is not in use and plugged into the microscope to be used following the
exchange of the scan head.
Fig. 1-22 Safety-Box of Axioskop 2 FS
MOT
with main connection to safety
interface (1)
Fig. 1-23 Connection of Axio Imager.Z1
to safety interface (1) and
electronics (2)
1
Fig. 1-24 Connection of Axiovert 200 M to
safety interface (1) Fig. 1-25 Four CAN connections (1) are
available on the rear side of the
electronics module. The microscope
in use has to be connected to one
of them