LSM 510
OPERATION IN EXPERT MODE
LSM 510 META
Acquire Menu
Carl Zeiss
03/06
B 45-0021 e
4-59
Further colors for the corresponding channel can
be produced as follows:
•
Clicking on the
Define
button will open a
further
Channel Colors
window.
All the available colors are shown as buttons in the
Current Set of Channel Colors
panel.
•
Via a reticule in the
Define Color
panel, any
desired color can be produced.
•
Clicking on the
Add
button allows the color to
be used for further channel coloring.
•
Choose the desired color with the reticule (the
reticule is in the left corner at the bottom of the
color range).
•
Define the brightness by use of the scroll bar.
•
Use the
Add
button to add the color to the
color range.
•
To delete a defined color, click on the relevant
color button and then on the
Remove
button.
Standard colors (black for OFF, red, green, blue and white) cannot be removed.
•
Click on the
Close
button to close the
Channel Colors
window.
−
Newly defined colors are accepted and displayed in the
Channel Color Selection
window. They
can then be used in the same way as standard colors.
The PMT1 photomultiplier is activated / deactivated by the check box.
•
Proceed in the same way for the other PMT photomultipliers.
The symbols for the transmitted-light PMT photomultiplier (ChD Transmission) and monitor
diode (ChM) can be activated in the same way as the photomultipliers of channels 1 to 4. The
use of the monitor diode function is described in detail in the annex of this manual.
When changing from the NFT 1 secondary dichroic beam splitter, the appropriate setting of the
NFT 3 secondary dichroic beam splitter is performed automatically.
Fig. 4-42
Channel Colors window
