![background image](http://html1.mh-extra.com/html/zeiss/lsm-510/lsm-510_manual_3415651258.webp)
OPERATION IN EXPERT MODE
LSM 510
DuoScan
Carl Zeiss
Macro Menu
LSM 510 META
DuoScan
4-196
B 45-0021 e
03/06
Select subprofiles from MULTIPLE PROFILE data
After acquisition of a
Multiple Profile
it is displayed as an XZ projection.
By variation of the
Z:XY ratio
slider on the right hand side of the image window the Z:X ratio could be
changed.
•
Click on the
Overlay
button in the main display window and define a region with
Rectangular
Frame
button in the
Overlay
menu.
•
Click on the
Extract Region
button in the
Overlay
menu. (For control the masked region is displayed
in blue colour in the range indicator mode.)
Mask out MULTIPLE PROFILE data
After acquisition of a
Multiple Profile
it is displayed as an XZ projection.
•
Click on the
Overlay
button and define a region with the rectangular frame.
•
Click on the
Cut
button. (For control the masked region is displayed in blue color in the range
indicator mode.)
Multiple Stack Button
If you click on the
Multiple Stack
button, the stage moves out of the center position of the mould (lens)
and is moved to the upper left corner to perform a first single stack. After that all other stacks are
acquired successive "neighbors" is performed.
If
a
Multiple Stack
scan is stopped before the regular end of the experiment, no correlation will
be performed.
Stop Button
If you click on the
Stop
button the acquisition is stopped immediately and the stage position returns to
the initial XY center position.
Close Button
If you click on the
Close
button the
Profile & Stack Stitching
window is closed.