LSM 510
OPERATION IN EXPERT MODE
LSM 510 META
Maintain Menu
Carl Zeiss
03/06
B 45-0021 e
4-237
•
Click on the
Close
button to exit the
Objective
Control
window and accept the settings.
4.10.3 Pinhole
Adjustment
In the
Pinhole and Collimator
window, the
pinholes and collimators are optimally aligned and
adjusted to the used beam path (configuration).
The position of the pinhole (X-Y-Z-coordinates) in
relation to the detector makes a major contribution
to image optimization.
In all existing standard configurations, the pinholes
have already been adjusted at the factory. These
settings are taken over for active operation when a
standard configuration is loaded.
If you want to create a setting that differs from the
standard configurations, adjust the pinhole as
follows.
4.10.3.1
Open / Close the Pinhole &
Collimator Control Window
•
Click on the
Pinhole
button in the
Maintain
subordinate toolbar of the
Main
menu.
−
This opens the Pinhole & Collimator Control
window.
•
Click on the
Close
button to quit the window.
Fig. 4-236
Objective Control window
Fig. 4-237
Pinhole & Collimator Control window
