LSM 510
OPERATION IN EXPERT MODE
LSM 510 META
Display and Analysis of Images
Carl Zeiss
03/06
B 45-0021 e
4-263
The animation is controlled via the following function elements:
Current Slice
slider: Manual movement through the individual slices of a stack by
moving the slider, or by entering the slice number in the input box. Slider can be accessed
only, when the automatic animation is off.
Start
slider: The setting of the
Start
sliders limits the number of slices to be used for the
animation. Previous slices are not taken into consideration for the animation. Can be
changed during automatic animation.
End
slider: The setting of the
End
slider limits the number of slices to be used for the
animation. Subsequent slices are not taken into consideration for the animation. Can be
changed during automatic animation.
Starts the forward motion of the automatic animation. After the last slice has been
passed, restart is made at the first slice.
Starts backward motion of the automatic animation. After the first slice has been passed,
restart is made at the last slice.
Starts the combined forward / backward motion of the automatic animation, i.e. when
the last slice has been reached, the backward motion is activated, and the forward
motion is activated again on reaching the first slice.
Stops the automatic animation.
Move to the first slice.
After each click on this button, backward motion is made by the number of slices set
under
Increment
.
After each click on this button, forward motion is made by the number of slices set under
Increment
.
Move to the last slice.
Speed1 /Speed2
buttons
/
sliders: Selection between two speeds, change of the
relevant speed via slider or input box.
Increment
slider: Reduction of the slices to be displayed by selecting an increment n
(step width) of slices to be taken into consideration for the animation. If n = 3, for
example, only every third slice of the stack will be displayed during the animation.
