Zeiss LSM 510 Manual Download Page 198

Page: 198 / 606

OPERATION IN EXPERT MODE

LSM 510

DuoScan

Carl Zeiss

Process Menu

LSM 510 META

DuoScan

4-136

B 45-0021 e

03/06

−

The image of the copied channel is then displayed in a new window or in the

Image Display

window activated for it.

•

The new image can be stored via the

Save As

function.

For Z Stacks or Time Series, the entire series of the selected channel is copied.

4.6.6 Duplication

(Image)

This function permits images (including Z Stacks and Time Series) to be duplicated completely.

•

If several images have been opened, select the image to be duplicated.

•

Click on the

Dup

button in the

Process

subordinate toolbar of the

Main

menu.

−

The selected image is duplicated and displayed in a new

Image Display

window.

•

Use the

Save As

function to store the image under a new name.

4.6.7 Filter

The filter function permits the subsequent
processing of scanned images via the integrated

Lowpass

Sharpness

and

Median

filters.

Furthermore,

User-defined

filters can be installed

by the user. User-defined filters can be stored,
reloaded and removed.

4.6.7.1

Open / Close the Filter Window

•

Click on the

Filter

button in the

Process

subordinate toolbar of the

Main

menu.

−

This opens the

Filter

window.

•

Click on the

Close

button to quit the

Filter

window.

4.6.7.2 Image

Panel

In the

Image

panel, the image or channel to be

processed is selected.

The currently selected image is displayed in the
image selection box.

Fig. 4-118

Filter window

Summary of Contents for LSM 510































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LSM 510

Reviews:

Related manuals for LSM 510

Brands by name

Popular brands

Zeiss LSM 510, Manual

Search results

Summary of Contents for LSM 510

Reviews:

Related manuals for LSM 510

Brands by name

Popular brands