LSM 510 AND LSM 510 META - SETUP REQUIREMENTS
LSM 510
DuoScan
Carl Zeiss
Space Requirements
LSM 510 META
DuoScan
2-6
B 45-0021 e
03/06
Two microscopes: 3 m x 3 m
Fig. 2-5
Space requirements for LSM with two microscopes
and AR UV Laser
(measurements in mm)
The System Electronic Rack contains all electronics for control of the hardware components of the
system, the power supply for the microscope, the scanning unit and the Laser Module RGB equipped
with the choice of lasers. The Laser Module RGB is set on top of the System Electronic Rack. The lab cart
holds the power supply for the UV laser and the UV Laser module.
On this table the extension of the system with LSM
DuoScan
is not possible (see chapter 2.1.5)!
