LSM 510
LSM 510 AND LSM 510 META - SETUP REQUIREMENTS
LSM 510 META
Space Requirements
Carl Zeiss
03/06
B 45-0021 e
2-9
2.1.6.2
Coherent "Verdi Mira" or Spectra Physics “Millenia Tsunami”. Directly-coupled with
upright or inverted Microscope: 3,5 m x 3,5 m
Fig. 2-8
Space requirements for Two Photon Laser and
Large NLO System Table. Set up of one LSM system with
two microscopes
(measurements in mm)
The System Electronic Rack contains all electronics for control of the hardware components of the
system, the power supply for the microscope, the scanning unit and the Laser Module RGB equipped
with the choice of lasers. The Laser Module RGB is set on top of the System Electronic Rack. Power supply
and cooling unit of the NLO Laser can be stored under the system table. This set up can hold two
microscopes. Coherent “Chameleon” or Spectra Physics “Mai Tai” lasers can also be used. With the
extension of LSM DuoScan (VIS and/or 405 nm) the Laser Module LIVE is situated in the System Electronic
Rack. The electronics for the NLO laser have to be set aside the System Electronic Rack. An additional lab
cart (000000-0465-515) is recommended. With the extension of the LSM DuoScan UV only additional
space is required to set up the UV laser (see chapter 2.1.4).
