Zeiss LSM 510 Manual Download Page 202

Page: 202 / 606

OPERATION IN EXPERT MODE

LSM 510

DuoScan

Carl Zeiss

Process Menu

LSM 510 META

DuoScan

4-140

B 45-0021 e

03/06

4.6.7.4 Preview

Panel

The Preview function allows you to have the result
of the

Filter

operation displayed as a preview

image.

•

Activate the

Preview

check box with a click of the mouse. The

Filter - Preview

Image Display

window with the filter result will be displayed.

•

Deactivate the

Preview

check box to close the

Filter - Preview

Image Display

window.

After a change of the filter settings, click in the

Filter - Preview

Image Display

window once

to update it.

4.6.8 Contrast

The

Contrast

function permits the subsequent modification of contrast and brightness of the stored

image.

•

Open the image to be processed and click on the

Contrast

button.

−

The function is performed with firmly set parameters and the result is displayed in a new

Image

Display

window. The procedure can be repeated as often as required.

•

The newly created image can be stored using the

Save As

function.

Fig. 4-124

Preview panel

Summary of Contents for LSM 510































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LSM 510

Reviews:

Related manuals for LSM 510

Brands by name

Popular brands

Zeiss LSM 510, Manual

Search results

Summary of Contents for LSM 510

Reviews:

Related manuals for LSM 510

Brands by name

Popular brands